Truck Car Auto

1949-50 Ford Car Stereo Radio/1951-52 Truck Radio AM-FM

1949-50 Ford Car Stereo Radio/1951-52 Truck Radio AM-FM
1949-50 Ford Car Stereo Radio/1951-52 Truck Radio AM-FM
1949-50 Ford Car Stereo Radio/1951-52 Truck Radio AM-FM
1949-50 Ford Car Stereo Radio/1951-52 Truck Radio AM-FM

1949-50 Ford Car Stereo Radio/1951-52 Truck Radio AM-FM    1949-50 Ford Car Stereo Radio/1951-52 Truck Radio AM-FM

Check out my other items. Fits your dash without any modifications. 4 × 45 watts RMS output allows up to 180 watts of audio power.

Beautiful Chrome plated Die Cast nose, buttons and knobs just like the original. Analog controls look and feel like the original radio. All controls easily accessible: Volume, Bass, Treble, Balance, Fader and Tuning from original-looking controls. MP3, iPod or XM/Sirius (satellite) inputs included. LED dial lights will never need replacing.

½ shafts on controls for mounting (same size and thread as original shafts). Small case size only 3¼ depth behind dash!

Allows room for air conditioning and large speakers. Memory retention for pushbuttons and user settings more than 40 years.

MIKE HAGAN ANTIQUE AUTO RADIO. READ MY FEEDBACK ON THESE RADIOS. THESE ARE HIGH QUALITY WITH GREAT RELIABILITY.

DUE TO HIGH DEMAND FOR THIS RADIO PLEASE. DUE TO THE CURRENT WORKING VIRUS CONDITIONS THEY ARE WORKING AT LESS THAN HALF STAFF. QUANTITIES IN THIS LISTING DO NOT REFLECT AVAILABILITIES. These radios are all hand built in the states. At the present time that hasnt been possible.

My goal is to give you the best service possible. Since many radios lack a tone control, this can limit the usability of the FMR-1 by forcing the addition of external controls on the radio chassis which are hard to access and operate. Many radios of the 1950s and 1960s used a tone switch which can now be configured to control the behavior of the volume control. Even if the radio has no tone control or tone switch, a simple SPST switch is all that needs to be added for full volume/tone/balance/fader support!

This can be extremely helpful on remote-head and hang-on radios of the 1930s and 1940s. With this unique method, the switch controls whether the volume control acts like a normal volume control or as the tone control with full virtual balance/fader support.

The volume of the radio is always maintained through a cleaver software algorithm so the user is never blasted out if the volume control is left to high. Of course you can still add external controls if desired. Another new feature that allows the use of OEM grounded wiper balance controls. With so many original radios using a grounded wiper style balance control, our dealers were looking for a solution. By adding a simple pull-up resistor, the FMR-1 can now use a grounded wiper control for balance.

While this arrangement normally presents a problem with the resulting control being extremely non-linear, the powerful microprocessor on the FMR-1 is able to perform the complex math required to correct for this with ease. The result is a balance control that works just like original. Two new features allow even more original controls to be used with the FMR-1! ALL factory fader controls are now supported including grounded wiper, multiple wiper and impedances as low as 10 ohms! Using unique circuitry, this is accomplished without any substantial power being dissipated in the control.

No longer are factory fader controls off limits! Tone rheostats and tone controls with grounded wipers can now be connected to the FMR-1 without modification. The FMR-1 is an exciting new product from Aurora Design LLC that opens up a new world of possibilities for early automotive radios. By replacing the electronics in an original radio with modern digital electronics, any radio can be brought up to todays standards, performance and reliability.

Designed to meet automotive OEM and SAE performance specifications, the FMR-1 represents a no compromise design. All critical components are full automotive OEM grade parts, not lower cost, lower quality parts designed for aftermarket/consumer products.

Every aspect of the design and operation of the FMR-1, no matter how insignificant was scrutinized, resulting in a product that performs beyond the expectations of even the most demanding user. Through the use of sophisticated algorithms and a custom RealTimeOperatingSystem (RTOS), the FMR-1 offers unprecedented levels of features and performance. Working equally well with any original tuner (inductive, capacitive and resistive) the FMR-1 offers smooth and precise tuning rivaling the best analog tuners available. Installation time is significantly reduced since the FMR-1 easily adapts to just about any radio configuration from the 1930s thru the 1980s.

Imagine, complicated and time consuming modifications to the tuners used on the Hudson/Nash Ramblers and Metropolitans, 1930s Philco-Ford or 1940s Zenith-Ford radios is a thing of the past! Even the complicated Rotomatic tuner used on the 1940 Zenith-Ford radio that switches between a variable capacitor for manual tuning and variable inductors for preset tuning is handled without any modifications by the FMR-1! The automotive grade receiver is extremely robust and offers such features as noise blankers which help eliminate ignition and generator/alternator noise and an automatic bandwidth filter that continuously adjusts from narrow to wide for optimum performance in all situations. The digitally controlled power amplifier provides up to 4 X 45W of output power and is fully protected against over-voltages, shorts between lines as well as to ground or power. It is controlled by the onboard microprocessor and intelligently monitors the speaker connections and makes decisions such as enabling or disabling the balance and fader controls based on these readings. It uses a unique Class SB topology similar to standard Class AB while using only 1/3 the power at normal listening levels resulting in less heat being generated. Five fully buffered line level outputs, four for front/rear channels and one for subwoofer, allow the FMR-1 to drive out-board amps for those who wish to add even more audio power. Stereo auxiliary inputs are provided for adding other audio sources such as iPods.

®, MP3 players, CD players, satellite radios, etc. Signal Seeking radios like the GM/Delco. ® Wonderbar®, Ford® Town & Country® and Chrysler® Electro-Touch® radios are fully supported including features like sensitivity controls (Town & Country). Under the skin, the FMR-1 was designed to be as robust as the operating features it offers.

Meeting industry performance specification like SAE J1113-42, the FMR-1 cannot be damaged by battery reversal, double battery jump starts, alternator disconnects (load dump), etc. Even if a careless mechanic accidentally connects the battery up backwards, the FMR-1 is completely protected.

Aurora Design automotive products are built in a 33,000 sq. ISO 9001:2000 facility located in the USA. With a capacity to place 1,800,000 components per day, 2D and 3D X-Ray inspection and full traceability back to the component level, the highest quality assemblies are assured. Aurora Design provides the only fully integrated Bluetooth. Solution for classic vehicles and hot rods!

Fully integrated into the radio, theres nothing for you to fumble with or cords you have to connect to use. A blue LED in the radio dial proudly indicates the Bluetooth status just like a modern car. When a call comes in, the radio softly mutes and the call comes up. The LED on the FMR-1 will change color to let you know you are in the Bluetooth mode. No wasting the radios Auxiliary input on a Bluetooth dongle.

No fumbling for knobs or switches to select the Bluetooth input. The FMR-1 and the BT-1 talk to each other to keep in perfect harmony, just like a modern Bluetooth equipped car.

The microphone on the BT-1 is placeable anywhere in the car for best performance. Rather than having your microphone down around your feet, or in your ashtray, wherever your cigarette lighter happens to be, the BT-1s microphone comes with a 9.8 (3m) cord so it can be place in the best spot for your car. Notice on most modern cars with hands-free operation, the microphone is mounted on the headliner right behind the windshield. With the BT-1s microphone this can also be accomplished. Dont try this with an aftermarket solution unless your cigarette lighter happens to be in your headliner!

Controlling streaming audio playback is just as easy. Just as you would tune the radio to a different channel to hear different music, by simply tuning the radio up or down while streaming, the BT-1 will skip to the next/previous song.

No little buttons or menus to fumble with, just use the same controls on your radio you normally use! No other product can boast the easy of use, performance and features of the BT-1. Of course you can add any old off-the-shelf Bluetooth adapter to the FMR-1... But with the BT-1 available, why would you ever want to?

Imagine cruising down the road in your classic vehicle or hotrod with with your favorite music streaming from its original radio. Not with the new BT-1 from Aurora Design LLC! With the BT-1, any radio that has been converted with an FMR-1 can be brought up to todays standards. Operation is completely automatic never requiring any input from the user. When you start streaming music on your device, the BT-1 will immediately mute the radio and start playing the streaming audio.

If a call comes in, the BT-1 will again mute the radio and allow you to take the call. When the call ends or you stop streaming music, the BT-1 tells the radio to go back to its normal mode. No waiting or having to fiddle with controls on the radio as required by lesser solutions.

A proprietary communication link between the BT-1 and FMR-1 does all the work for you ensuring they always work in harmony. Designed to meet automotive OEM and SAE performance specifications, the BT-1 represents a no compromise design. Every aspect of the design and operation of the BT-1, no matter how insignificant was scrutinized, resulting in a product that performs beyond the expectations of even the most demanding user. Unlike many aftermarket Bluetooth products that are not certified or have been heavily modified, the BT-1 is based on a fully certified module.

With certifications for FCC, IC, CE and the Bluetooth SIG, you are assured of the most robust, compatible product available. Bring your radio into the 21. Aurora Design is proud to announce the latest addition to its industry leading line of products.

The USB-1 joins the industries only fully integrated line of products allowing your classic radio to operate just as if it had been designed and built in the 21. Now you can have hundreds, thousands, or even tens of thousands of your favorite songs right at your fingertips. USB FLASH Drives, sometimes referred to as thumb drives, have become the ubiquitous format for carrying around audio files. An extremely inexpensive USB drive has the capability to hold literally thousands or tens of thousands of songs, audio books, podcasts, etc. With the USB-1, these USB drives can now be used in your classic or hot rods radio as easily as your modern car.

Just plug the USB drive into the cable on your radio and it will switch over and start playing. Of course since all Aurora Design products are engineered to work seamlessly together, you can control such things as next/previous, play/pause and random/sequential playback right from the existing controls on your radio. Unlike clunky aftermarket solutions, everything is automatic! The USB-1 is smart enough so that if you stop to get gas or grab lunch, when you turn the radio back on, it will continue from where it left off. Many cheaper solutions will return to the first song and start over again which can get very annoying.

With the USB-1, no one is left out. Once again Aurora Design is causing a paradigm shift in how the industry views classic radios and what is possible. Designed to meet automotive OEM and SAE performance specifications, the USB-1 represents a no compromise design. Every aspect of the design and operation of the USB-1, no matter how insignificant was scrutinized, resulting in a product that performs beyond the expectations of even the most demanding user. Aurora Design provides the only fully integrated.

Classic vehicle or hot rods original radio! Youre driving down the road in your cherished classic or hot rod. You then get nostalgic for that certain song you havent heard in a while, so you twist the control again and tell the radio to start playing that song. For a minute you actually forget that you arent in your modern car but in your classic car.

Not with the new BTU-1 with. While some companies call off-the-shelf adapters or clunky boxes solutions, Aurora Design is the only company to offer a custom designed, fully integrated, full featured, Bluetooth/USB/MP3 solution that truly brings your radio into the 21.

Because the BTU-1 was designed to fully and seamlessly interface to the FMR-1 receiver, no aftermarket add-on product is even in the same league. No cords to fumble with, no hard to reach little buttons, no fiddling with the radio to get into the right mode, the FMR-1/BTU-1 combination is fully automatic just like a modern car. Using only your original radio controls, you can have a.

Modern solution that rivals any new car! Streaming audio from a USB FLASH Drive or from your Bluetooth device is easily controlled with just a twist of a knob. Start and stop playback and skip forward and backwards through your songs.

With literally thousands of songs at your fingertips, youll never run out things to listen to on that cross country tour! And so you dont get lost, let your Bluetooth device that supports turn by turn navigation direct you to your destination through your radio.

The microphone on the BTU-1 is placeable anywhere in the car for best performance and with advanced noise cancellation software you always get the best sound possible. The microphone comes with a 9.8 (3m) cord so it can be place in the best spot for your car. With the BTU-1s microphone this can also be easily accomplished.

No other product can boast the easy of use, performance and features of the BTU-1. For the ultimate in 21. Century performance in your classic radio, look no further than the FMR-1/BTU-1 combination. Designed to meet automotive OEM and SAE performance specifications, the BTU-1 represents a no compromise design.

Every aspect of the design and operation of the BTU-1, no matter how insignificant was scrutinized, resulting in a product that performs beyond the expectations of even the most demanding user. Unlike many aftermarket Bluetooth products that are not certified or have been heavily modified, the BTU-1 is based on a fully certified module.

WATCH COMPLETE VIDEO AT SITE BELOW. 1954 1ST SERIES 1955 CHEVY TRUCK.

1957 FORD TOWN AND COUNTRY. 1958 FORD TOWN AND COUNTRY. 1959 FORD TOWN AND COUNTRY.

1960-61 FORD GALAXIE, FAIRLANE, CUSTOM. 1962 (LATE) 1963 FORD FAIRLANE. 1965-66 Ford Mustang & 1965 Falcon/Ranchero.

1964-66 CHEVY AND GMC TRUCK. Not 100% exactly like the originals. But they fit, with the correct knobs and pushbuttons! Car manufacturers often adapted production radios to fit new or low-volume models.

For example, in 1964 GM slightly modified their full-size passenger car manual-tune radios to fit their trucks. The only difference between the 1964 Impala radio and the 1964-66 Chevy Truck radio is the tuning shaft bushing and the knobs. By modifying the shafts and replacing the knobs, we can supply a radio that fits perfectly and looks authentic, even though GM never offered this option. Our DREAM LINE Radios are made from the top-of-the-line models for that year.

DREAM LINE REPRO RADIOS ALREADY AVAILABLE. Despite the popularity of and demand for our radios. The item "1949-50 Ford Car Stereo Radio/1951-52 Truck Radio AM-FM" is in sale since Sunday, April 17, 2016.

This item is in the category "eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Radio & Speaker Systems". The seller is "gto390" and is located in Fairless Hills, Pennsylvania. This item can be shipped worldwide.
1949-50 Ford Car Stereo Radio/1951-52 Truck Radio AM-FM    1949-50 Ford Car Stereo Radio/1951-52 Truck Radio AM-FM